CUTTING CAPACITIES
0º -45º +45º
ROUND profile 130 130 130 (mm)
ROUND Bar 100 100 100 (mm)
SQUARE profile 120 110 110 (mm)
RECTANGULAR profile 100x170 100x140 100x140 (mm)
TECHNICAL FEATURES
- Automatic feeding step (mm) 1000
- Three-phase motor 400V / 50Hz / 2,5 KW
- Two (2) different disc rotation speed (rpm) 33 / 66
- Diameter of cutting disc (mm) 370
- Vice opening (mm) 185
- Machine dimensions (mm) 3500 x 1200 x 1900
- Machine weight (Kg) 900
STANDARD MACHINE FEATURES
- The machine can perform Automatic Cutting Cycle
- Automatic share perfoming cuts from 0º to 45º left and 45º right
- The CNC Control Panel is supplied with 9 programs, each of them with 99 steps for a total of about 890 cutting positions with relevant piece-counter
- Automatic, step by step feeding with 1000 mm stroke
- Vice complete with anti-burr device and tempered and ground vice jaws
- Vice pressure regulator
- Motor pump for disc lubrification complete with shave breaker to keep the blade cleaned
- Adjustable stops for head vertical stroke
- Head lowering adjustment
- Tempered and ground vertical slider
- Bar support with rolls and length of 1,5 mt
- Steel pedestal
- Maintenance/Service Tools
- Instruction Manual and exploded view of spare parts
MACHINE OPERATION / AUTOMATIC CYCLE DESCRIPTION
- Automatic material feeding
- Fixed vice lock
- Rotation of the disc and delivery of the coolant
- Head down-feed untill the finishing of the cut
- Feeding carriage return until the fixed measure
- Head return, blade revolution and coolant delivery stopping
- Vice opening
- Cycle repetition
The model NTA 370, is a CNC Automatic machine and it is an economic and reliable solution for the cutting of metal profiles
Capability of straight cut (0º) as well as angle/mitre cutting (from -45º up to +45º)
High level accuracy in cutting
Automatic material feeding
CNC Control panel allows programming of cutting steps and the execution of fully automatic cutting cycles without operator presence
Easy to use : Practical, simple and ergonomic operations
Fast cutting operations
Disc Speed Inverter
Three-phase low speed motor 400V / 50Hz / 1,9 KW / rpm 17/34
Additional hydraulic vice
Microlubrication System
Bar support / roller with 2 / 4 / 6 mt length
AUTOMATIC BAR FEEDER / LOADER
Bar loader with inclined table for bandsaws and cutting off machines, for the loading of round, squared, rectangular bars (profiles or full material).
As an example, on the loading table, width 1025 mm it is possible to load n. 8 round full material bars Ø 120 mm (n. 25 bars Ø 35 mm, n. 22 bars 45 mm, and so on).
The loader stores bars that the machine in automatic function self loads, proceeds with butt cut and to the cutting program as set, when the bar end is no longer workable, the loader puts through a new bar pushing out the rest material. The cicle continues until bars loaded are over.
TECHNICAL DATA AND STANDARD ACCESSORIES
Loader Capacity
Bar length (mm) min. 2000 - max. 6000
Load (Kg) 5000
Loader weight (Kg) 1200
Loadable material
Pipes, profiles or full material : diameter (mm) min. 15 - max. 120
Squared bars, profiles or full material : dimensions (mm) min. 15x15 - max. 100x100
Loader is powered by the machine
