CUTTING CAPACITIES
0º +45º +60º
ROUND profile 300 265 130 (mm)
ROUND SOLID/BAR 220 220 130 (mm)
SQUARE profile 290 265 130 (mm)
RECTANGULAR profile 290x320 220x220 130x130 (mm)
TECHNICAL FEATURES
- Automatic feeding step (mm) 1000
- Speed Variator (m/1') 20 - 90
- Vice opening (mm) 320
- Machine dimensions (mm) 2045 x 3385 x 1940
- Machine weight (Kg) 960
STANDARD MACHINE FEATURES
- The CNC control panel consists with 9 programs, each of them with 99 steps, for a total of about 890 cutting positions with relevant piece-counter.
- Automatic, step by step feeding with 600 mm, with Ball-screw.
- Digital control of quality and cutting length
- Hydraulic jack with regulation of cutting pressure
- Capability of vertical cutting (0º) as well as angle/mitre cutting (up to +60º)
- Bimetal Blade with dimensions (mm) 3200 x 27 x 0,9
- Blade cleaning device with brush
- Blade tensioning obtained through manual rotation of the handwheel and guaranteed by electro-mechanical switch
- Vice pressure regulator
MACHINE OPERATION / AUTOMATIC CYCLE DESCRIPTION
- Automatic material feeding
- Fixed vice lock
- Rotation of the blade and delivery of the coolant
- Bow down-feed untill the finishing of the cut
- Feeding carriage return until the fixed measure
- Bow return, blade revolution and coolant delivery stopping
- Vice opening
- Cycle repetition
The model SPECIAL 390 Α, is an Automatic machine and it is an economic and reliable solution for the cutting of metal profiles
Capability of straight cut (0º) as well as angle/mitre cutting (up to +60º)
Always straight cut through the basic characteristics of the machine such as rigidity of blade support, flywheel dimensioning, band guides and band stretching
High level accuracy in cutting
Automatic material feeding and control of bow descent speed
CNC Control panel allows programming of cutting steps and the execution of fully automatic cutting cycles without operator presence
Longer blade life : High reliability Band rotation and stretching control provides security in Band rotation, keeps it under low tension and as a result gives a longer life to the blade
Easy to use : Practical, simple and ergonomic operations
Fast cutting operations
- Hydraulic vertical pressing device, suitable also for stack/bandles cutting (max. cutting angle +45º)
- Automatic material feeding with increased step 1000 mm
- Microlubrication System
- Bar support/roller with 2mt length.
AUTOMATIC BAR FEEDER / LOADER
Bar loader with inclined table for bandsaws and cutting off machines, for the loading of round, squared, rectangular bars (profiles or full material).
As an example, on the loading table, width 1025 mm it is possible to load n. 8 round full material bars Ø 120 mm (n. 25 bars Ø 35 mm, n. 22 bars 45 mm, and so on).
The loader stores bars that the machine in automatic function self loads, proceeds with butt cut and to the cutting program as set, when the bar end is no longer workable, the loader puts through a new bar pushing out the rest material. The cicle continues until bars loaded are over.
TECHNICAL DATA AND STANDARD ACCESSORIES
Loader Capacity
Bar length (mm) min. 2000 - max. 6000
Load (Kg) 5000
Loader weight (Kg) 1200
Loadable material
Pipes, profiles or full material : diameter (mm) min. 15 - max. 120
Squared bars, profiles or full material : dimensions (mm) min. 15x15 - max. 100x100
Loader is powered by the machine